GT-2188 Series Manual Pluse Generator With Emergency Stop Button For CNC Lathe And Printing Mechanism, To Accomplish Zero Collaboration Or Signal Segmentation

Manual pulse generators(handwheel/mpg) are typically rotating knobs that generate electrical pulses. They are normally associated with computer numerically controlled (CNC) machinery or other devices involving positioning.When the pulse generator sends an electrical pulse to an equipment controller, the controller then moves a piece of equipment a predetermined distance with every pulse.
send email to us

Products Details

GT-2088 Series Manual Pluse Generator For CNC Lathe And Printing Mechanism, To Accomplish Zero Collaboration Or Signal Segmentation A manual pulse generator (MPG) is a device for generating electrical pulses (short bursts of low current) in electronic systems under the control of a human operator (manually), as opposed to the pulses automatically generated by software. MPGs are used on computer numerically controlled (CNC) machine tools, on some microscopes, and on other devices that use precise component positioning. A typical MPG consists of a rotating knob that generates pulses that are sent to an equipment controller. The controller will then move the piece of equipment a predetermined distance for each pulse. An MPG is a common accessory found on CNC machine tools. It is a manually controlled rotary handwheel that the machine operator uses to move a tool incrementally along an axis. The GT SERIES provides 100 detent positions per revolution and outputs one A/B quadrature pulse cycle per detent. The quadrature outputs tell the machine both the number of incremental steps to move and direction. The  GT SERIES Is intuitive operation, tactile feedback and ease of interface is ideal for use in all types of teach pendants, control panels, motor drives, position control systems and electronic instrumentation. GT SERIES universal nature comes from the user-accessible DIP switch used to configure both power supply options (+5V or +12VDC) and A/B pull-up interface options (either Standard 2K ohm or FANUC-type 330 ohm pull-up resistors) It is also the first handwheel offering a modern, efficient industrial connection scheme based on the proven Phoenix Contact COMBICON screw-down wiring plug and pin header system. The heavy duty unit incorporates a metal housing, metal knob and rated IP50 (dust protected). GT-2088 manual pulse gererator Enable button and E-stop button,with options of 25ppr and 100ppr, can work with GSK  SYNTEC  KND  SIMENS  MITSUBISH  FANUC System.

Model: ADK2188

 Features:1.Gertech Hand Wheel is widely applied in CNC Lathe and Printing Mechanism, to accomplish

 zero Collaboration or Signal Segmentation.

2.High reliability, long life and strong anti-interference ability,wide temperature range for operating.

3.Metal gear brings, reliable and clear feeling when rotating;

4.Plastic Cover, Oil-proof Seal Design;

 GSK  SYNTEC  KND  SIMENS  MITSUBISH  FANUC System

 
Size

210 x88mm
Resolution 100,25ppr
Supply Voltage 5v, 12v, 24v(+-10%)
Output form Line Driver, Voltage Output
Max Current Consumption 80mA(Line) 120mA(V)
Max. Response Frequency 10khz
Rise/fall Time 200ns(Line Driver),1μs(Voltage)
Net Weight 1100g
Working Temp. -20℃-85℃
Humidity 30~85%
Degree of Protection IP50
Options of Axles X,Y,Z,4 / X Y Z 4 5 6  
Magnification Levels X1,X10, X100
Five steps let you know how to select your encoder: 1.If you've already used encoders with other brands, plz feel free to send us the information of the brand info and encoder info, like model no, etc, our engineer will advise you with our euqivalent replacement at a high cost performance; 2.If you want to find an encoder for your application, plz first select encoder type: 1) Incremental encoder 2) Absolute encoder 3) Draw Wire Sensors 4) Manual Pluse Generator 3. Choose your output format(NPN/PNP/LINE DRIVER/PUSH PULL for incremental encoder) or interfaces(Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP); 4. Select the resolution of the encoder, Max.50000ppr for Gertech incremental encoder, Max.29bits for Gertech Absolute Encoder; 5. Select the housing Dia and shaft dia. of the encoder; Gertech is popular equivalent replacement for similar foreign products such as Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer /Tamagawa/Hengstler /Trelectronic/Pepperl+Fuchs/Elco/Kuebler ,ETC.   Gertech Equivalent replace: Omron: E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C, E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C, E6A2-CWZ3E, E6A2-CWZ5C; E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C, E6B2-CWZ3E, E6B2-CBZ5C; E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C, E6C2-CWZ3E, E6C2-CBZ5C; Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series   Packaging Details The rotary encoder is packed in standard export packaging or as required by buyers;   FAQ: 1) How to select an encoder? Before ordering encoders, you could clearly know which type of encoder you may need. There are incremental encoder and absolute encoder, after this, our sale-service department would better work for you. 2) What specifications are requested before order an encoder? Encoder type----------------solid shaft or hollow shaft encoder External Diameter----------Min 25mm, MAX 100mm Shaft Diameter---------------Min shaft 4mm, Max shaft 45mm Phase & Resolution---------Min 20ppr, MAX 65536ppr Circuit Output Mode-------you could choose NPN,PNP,Voltage, Push-pull,Line driver, etc Power Supply Voltage------DC5V-30V 3) How to choose a right encoder by yourself ? Exact Specification Description Check The Installation Dimensions Contact Supplier to get more details 4) How many pieces to start ?  The MOQ is 20pcs .Less quantity is also ok but the freight  is  higher. 5) Why choose "Gertech" Brand Encoder? All encoders are designed and developed by our own engineer team since year 2004,and most of the electronic component of encoders are imported from overseas market. We own the Anti-static and no-dust workshopand our products pass the ISO9001. Never let our quality down,because quality is our culture. 6) How long is your lead time? Short lead time----3 days for samples,7-10days for mass production 7) what is your guarantee policy? 1year warranty and life-long technical support 8)What are the benefit if we become your agency ? Special prices, Market protection and supporting. 9)What is the process to become Gertech agency? Please send us enquiry,we will contact you as soon as possible. 10)What is your production capacity? We produce 5000pcs every week.Now we are building second phrase production line.

Previous:GI-D60 Series 0-3000mm Measurement Range Draw Wire Encoder

Next:GS-SVZ35 Series Servo Motor Encoder

el5101 beckhoff, Quadrature Encoder Stm32, E6a2 Cwz5c, Mult-turn Absolute Encoder, Motor Encoder, Absolute Encoder And Incremental Encoder, Que Es Un Encoder Incremental, Incremental Encoder With PNP Output, analog draw wire encoder, Encoder China,

Featured Products

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours