| Product characteristics | |
| Housing Dia.: | 38,50,58mm |
| Solid Shaft Dia.: | 6,8,10mm |
| Electrical Data | |
| Resolution: | Single turn max.8192ppr |
| Interface: | Analog, 4-20mA, 0-10v |
| Supply Voltage: | 8-29V |
| Max. Frequency Response | 30Khz |
| Mechanical Data | |
| Start Torque | 0.01N•M |
| Max. Shaft Loading | Axial: 5-30N, Radial:10-20N; |
| Max. Rotary Speed | 3000rpm |
| Weight | 160-200g |
| Environment Data | |
| Working Temp. | -30~80℃ |
| Storage Temp. | -40~80℃ |
| Protection Grade | IP54 |
| Ordering Code |
| Dimensions |
Note: ▶Adopt elastic soft connection shall be applied between encoder shaft and output shaft of user end to avoid damage of encoder shaft system due to serial movement and run out of user shaft. ▶Please pay attention to the allowable axle load during installation. ▶Make Sure that the difference Between Axial Degree of encoder shaft and user output shaft shall be no more than 0.20mm, and the deviation angle with axis shall be less than 1.5 °. ▶Try to avoid knocking and falling collision during installation; ▶Do not connect the power line and the ground wire in reverse. ▶The GND wire shall be as thick as possible, generally larger than φ 3. ▶Output lines of encoder shall not be overlapped with each other to avoid damaging output circuit. ▶Signal line of encoder shall not be connected to DC power supply or AC current to avoid damaging output circuit. ▶The motor and other equipment connected to the encoder shall be well grounded without static electricity. ▶Shielded cable shall be used for wiring. ▶Before starting the machine, carefully check whether the wiring is correct. ▶During long-distance transmission, the signal attenuation factor shall be considered, and the output mode with low output impedance and strong anti-interference ability shall be selected. ▶Avoid using in strong electromagnetic wave environment. Packaging Details The rotary encoder is packed in standard export packaging or as required by buyers; FAQ: 1) How to select an encoder? Before ordering encoders, you could clearly know which type of encoder you may need. There are incremental encoder and absolute encoder, after this, our sale-service department would better work for you. 2) What specifications are requested before order an encoder? Encoder type----------------solid shaft or hollow shaft encoder External Diameter----------Min 25mm, MAX 100mm Shaft Diameter---------------Min shaft 4mm, Max shaft 45mm Phase & Resolution---------Min 20ppr, MAX 65536ppr Circuit Output Mode-------you could choose NPN,PNP,Voltage, Push-pull,Line driver, etc Power Supply Voltage------DC5V-30V 3) How to choose a right encoder by yourself ? Exact Specification Description Check The Installation Dimensions Contact Supplier to get more details 4) How many pieces to start ? The MOQ is 20pcs .Less quantity is also ok but the freight is higher. 5) Why choose "Gertech" Brand Encoder? All encoders are designed and developed by our own engineer team since year 2004,and most of the electronic component of encoders are imported from overseas market. We own the Anti-static and no-dust workshopand our products pass the ISO9001. Never let our quality down,because quality is our culture. 6) How long is your lead time? Short lead time----3 days for samples,7-10days for mass production 7) what is your guarantee policy? 1year warranty and life-long technical support 8)What are the benefit if we become your agency ? Special prices, Market protection and supporting. 9)What is the process to become Gertech agency? Please send us enquiry,we will contact you as soon as possible. 10)What is your production capacity? We produce 5000pcs every week.Now we are building second phrase production li